Advertisement
Subject: Ethernet / Wireless Bridge
NA8440-04-00
These instructions explain the Ethernet / Wireless bridge installation for SEFRAM 8440 – DAS1400 – DAS 600 recorders. In our
example, this bridge will be used in a simple point-to-point network for the implementation of a recorder in the company wireless
network.
Operating principle
8440
DAS1400 – DAS 600
This type of Ethernet / Wireless bridge is used to connect the recorder to a company wireless network. Thus, the recorder can
be monitored by remote applications, particularly with the software SEFRAM Pilot.
Recorder setting
To go to the network parameters of the recorder, press « Set-up » / « Ethernet » line / « Option » / « modif » keys. In this
menu, it is necessary to configure the different components according to company network parameters (contact your network
manager).
Ethernet / Wireless bridge and wireless access point configuration
Disconnected
DAS1400 – DAS 600
Before operating, Ethernet / Wireless bridge has to be preset. Refer to user's manual to know the preliminary
instructions for its installation on the network.
In general, a default IP address, a login and a password are provided. The different elements have to be set
according to the network parameters set up in your company.
SEFRAM Instruments & Systèmes
32, rue E. MARTEL – BP 55
42009 SAINT-ETIENNE cedex 2
Ethernet / Wireless
Bridge
Wired link Ethernet
Network configuration window
8440
Ethernet / Wireless
Principal diagram
Bridge
E-Mail : sales@sefram.fr
Web : www.sefram.fr
Company network
Company wireless
access point
Company PC &
network
Fax : (33) 04 77 57 23 23
Advertisement
Table of Contents
Related Manuals for SEFRAM 8440
Summary of Contents for SEFRAM 8440
- Page 1 NA8440-04-00 These instructions explain the Ethernet / Wireless bridge installation for SEFRAM 8440 – DAS1400 – DAS 600 recorders. In our example, this bridge will be used in a simple point-to-point network for the implementation of a recorder in the company wireless network.
- Page 2 This access point can be another bridge or standard wireless point. In any case, settings are similar to the detailed one (network type, Mac address of the bridge, confirm and restart). Setting window of bridge SEFRAM Instruments & Systèmes 32, rue E. MARTEL – BP 55 E-Mail : sales@sefram.fr 42009 SAINT-ETIENNE cedex 2 Web : www.sefram.fr...
- Page 3 The bridge and the access point configured, you have to connect the recorder to the bridge and start the communication process with the network. By using SEFRAM Pilot, it is now possible to remotely monitor the recorder through a wireless connection.
Need help?
Do you have a question about the 8440 and is the answer not in the manual?
Questions and answers