Barracuda CloudGen Firewall
Memory
HDD (formatted)
SSD (formatted)
Flash Disk
USB
Form Factor
Dimensions (W/D/H)
When planning to deploy this model with the Barracuda 19" Rackmount Shelf Kit, please take into
consideration, that the overall height exceeds one rack unit (1 RU).
Net Weight
Power Supply Input Voltage
Power Supply Output Voltage
Power Supply Voltage
Power Supply Watts
Storage Temperature
Operation Temperature
Relative Humidity
Fan
Certifications
Wi-Fi (F201 only)
The hardware specifications list was valid at the time this manual was published. The listed
components are subject to change at any time, as Barracuda Networks may change hardware
components due to technological advancements. Therefore, the list may not reflect the current
hardware configuration of the Barracuda Networks NG Firewall or NG Control Center appliance it
was delivered with.
Status LED
Your appliance is equipped with a variety of LEDs. One of them is the Status LED. It is labeled either
with a heart symbol or the term Status. It indicates the appliance's operational state by changing
colors between green, orange, and red and by changing between blinking and steady glowing. The
table below shows the different meanings of the different glowing states.
Barracuda NG Firewall F200 / F201 Revision A
40 to 320 GB SSD or HDD (Depending on model
revision)
2x USB 2.0
Desktop
36 x 19 x 5 cm
14.2 x 7.5 x 2.0 in
100 - 240 V, AC
12 V, DC
47 Hz - 63 Hz
-20 °C - +70 °C
0 °C - 40 °C
5% - 95%, non-condensing
1 System Fan
CE, FCC, ROHS
802.11 b/g or better extended range Wi-Fi adapter
1 GB
-
128 MB
3.6 kg
60 W
2 / 5