Using The Rossini Dac And Clock With A Transport - DCS Rossini Clock User Manual

dCS Rossini Clock User Manual

Using the Rossini DAC and Clock with a Transport

The Rossini Clock has a third output (normally fixed at 44.1kHz), which may be used to synchronise
another source, such as an SACD Transport.
Analogue outputs
Figure 2 – Using the Rossini DAC and Clock with a Vivaldi Transport
• Connect the system as shown above.
• Use the DAC's
Input
Set the DAC's
The Vivaldi Transport will lock to the word clock and display this icon.
• If you want to listen to CD playback in native 16/44.1 format, connect one of the Transport's SPDIF
outputs to the DAC's matching input. Note that the Transport's PCM outputs must be turned on.
Select that input and set it to Master Mode also.
Output 3
The Rossini Player will also work in this setup.
Rossini Clock Manual v1_0x
button to select the input you want to use
Unit Settings > Sync Mode
resets to 44.1kHz when the Clock powers up.
(AES1+2
menu page to Word Clock 1-2 Auto
Page 8
Software Issue 1.0x
February 2016
in the example).
mode.
English version