Front Panel; Dither Buttons; Power Button - DCS Rossini Clock User Manual

dCS Rossini Clock User Manual
F P
RONT ANEL
A

Dither Buttons

The Dither feature is designed to exercise the Phase-Locked–Loop in the Player / DAC to improve the
correction of small timing errors. Try it and see what you think!
Press one or both of the
on, the LED to the right of the button will illuminate.
Dither 1
affects Word Clock
Dither 2
affects Word Clock

Power Button

To switch on, ensure the rear panel switch is set to
panel once.
To set the unit to sleep mode, press the
the Word Clock Outputs will be muted, but the unit will remain close to running temperature. Press
again to return to normal operation.
To switch off, hold down the
Rossini Clock Manual v1_0x
B C
Figure 3 – Front panel
Dither
buttons (A & B) to turn the Dither feature off and on. When Dither is
Output 1; also Output 3
Output 2; also Output 3
Power
Power
button for few seconds until the LED turns off, then release it.
Page 11
if it is set to 44.1kHz.
if it is set to 48kHz.
I
and press the
button once. The LED beside the button will dim and
Software Issue 1.0x
February 2016
Power
button (C) on the front
English version