Easy Top DELANEY WRITING DESK User Manual page 6

ASSEMBLY INSTRUCTION
Caution:
*Need at least 2 adults to complete this step.
*Before this step, please put all parts on a soft and clean surface to prevent any damage or scratch product finish.
3-1. Put Metal Cam (6) into hole on the Connect Bar (D), then assemble Connect Bar (D) to Right Side Panel(C).
3-2. Use Hex Wrench (8) to lock the Metal Cam (6) according to the direction of rotation as above shown.
Do not tighten Metal Cam in this step, as you might need to adjust it later.
Hardware and Tool Used
6
Metal Cam x1
8
STEP 3
Big Hex Wrench x1
6 of 11