Advertisement
Installing the 4" Round Canopy
3A
ELECTRICAL BOX
5
12 VOLT
TRANSFORMER
WIRES
CEILING
4" ROUND
CANOPY
6
NOTE: Use the provided universal round crossbar
when the canopy holes do not line up with the
electrical box holes.
1
Turn the power to the electrical box off.
In accordance with local electrical codes, connect the
2
transformer green wire to the ground.
3
Connect the 120 volt white transformer wire to the
neutral power line wire with a wire nut.
Connect the 120 volt black transformer wire to the hot
4
power line wire with a wire nut.
Place the transformer and all the wires inside the
5
electrical box. Use the adhesive pad to secure the
transformer in the electrical box.
Mount the 4" round canopy to the electrical box with
6
the two long #8-32 screws.
120 VOLT
POWER WIRES
4
2
3
LONG #8-32
ROUND HEAD
6
SCREW
Installing the Rectangular Canopy
4A
3
5
12 VOLT
TRANSFORMER
WIRES
Turn the power to the electrical box off.
1
In accordance with local electrical codes, connect the
2
transformer green wire to the ground.
Connect the 120 volt white transformer wire to the
3
neutral power line wire with a wire nut.
Connect the 120 volt black transformer wire to the hot
4
power line wire with a wire nut.
Place the transformer and all the wires inside the
5
electrical box. Use the adhesive pad to secure the
transformer in the electrical box.
Mount the rectangular canopy to the electrical box with
6
the two #6-32 screws.
2
120 VOLT
#6-32 SCREWS
POWER WIRES
2
6
4
6
WALL
RECTANGULAR
CANOPY
Advertisement
