Compliance With Standards - Philips RQ1087/21 User Manual

- Only use the Jet Clean System with the original HQ200 cleaning fluid.
- Never immerse the Jet Clean System in water nor rinse it under the
tap. (Fig. 2)
- Use and store the Jet Clean System at a temperature between 5°C
and 35°C.
- Always place the Jet Clean System on a stable, level and horizontal
surface to prevent leakage.
- Empty the cleaning chamber and clean it thoroughly by rinsing it with
hot tap water every 15 days.
- Always place the Jet Clean System on a fluid-resistant surface.
- The Jet Clean System thoroughly cleans but does not disinfect your
shaver, therefore do not share the shaver with others.
- The cleaning chamber of the Jet Clean System is not dishwasher-
proof.
- When the Jet Clean System is ready for use, do not move it to
prevent leakage of cleaning fluid.
- Never immerse the Power Pod in water, nor rinse it under the
tap (Fig. 3).

Compliance with standards

- The shaver complies with the internationally approved IEC safety
regulations and can be safely cleaned under the tap (Fig. 4).
- These Philips appliances comply with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliances are safe to use based
on scientific evidence available today.
general
- The adapter transforms 100-240 volts to a safe low voltage of less
than 24 volts.
- Noiselevel: Lc= 64 dB(A)
Overview (Fig. 5)
Protection cap
A
Shaving unit
B
Trimmer
C
Trimmer on/off slide
D
English
7