Starting Procedure - CITROEN Berlingo Electric Handbook

STARTING PROCEDURE

Starting the vehicle
- To start the vehicle, the
drive selector must be in
position P ,
- press the brake pedal,
- torn the ignition key in the
switch.
Ready
This indicator lamp comes on
when the vehicle is ready to drive.
- Press the brake pedal,
- select R or D ,
- release the brake pedal
and press the accelerator
pedal to move off.
Parking the vehicle
When leaving the vehicle, it is strongly
recommended that you apply the
parking brake, place the drive selector
in position P then switch off the
ignition.
There is an audible signal on opening
the driver's door if:
- the ignition is still on (" Ready " lamp on),
- the vehicle has not been correctly
immobilised (drive selector not in
position P ).
An alert message is displayed in the screen.
Drive selector
If the drive selector is not in
position P and/or if the brake pedal is
not pressed, The vehicle will not start.
Repeat the procedure for starting the
vehicle.
The selection of position D or R on
the drive selector determines the drive
direction. It is preferable to be at a
full stop before changing the drive
direction.
The selection appears in the current
energy consumption screen in the
instrument panel.
P (Park). Parking. Move the
selector to position P , there is
an audible signal.
The driver must be particularly
vigilant when driving the electric
vehicle as it makes very little noise
when moving.
N (Neutral). Move the
selector to position N , there is
an audible signal.
Do not select this position, even
momentarily, when the vehicle is
moving.
The vehicle is free-wheeling. Select D
to return to forward drive.
D (Drive). Forward drive.
Move the selector to
position D , there is an audible
signal.
It is recommended that you keep
your foot on the brake pedal when
selecting positions R or D .
R (Reverse). Reverse
drive. Move the selector to
position R , there is an audible
signal.
Only engage reverse when the
vehicle is immobilised.
When moving from position R to
position P , N is displayed momentarily
in the instrument panel.
There is an audible signal when
changing drive position with the
selector.
The audible signal is deactivated if the
user has chosen to inhibit operation of
the "Rear parking sensors".