Installation Tips - New Age Bold Series 3.0 Assembly Lnstructions

6 Drill a pilot hole using a 3/16" drill bit. Using a 1/4" x 2-1/2" lag bolt, one 1/4" ID Fender
Washer and a 7/16" socket, bolt the Wall Shelf into the Stud. Repeat for remaning studs and
second shelf.
Parts Needed:
Lag Screw
Lag Bolt (1/4"dia x 3")
(1/4" dia x 2-1/2")
Fender Washer 7/16" Socket
7/16" socket
(1/2" OD)
7
Using two M5 Phillips bolts, screw the Light Valance into the Wall Shelf hex rivet. Repeat
for all remaning Light Valances.
Parts Needed:
M5 Bolt
(M5 x 12mm)
Light Valance

Installation Tips

Note:
The Top Shelf is capable of being installed upside down if desired.
1 To install the Top Shelf upside down, flip the shelf to where the top of the shelf is now facing
down. Insert the 1/4" Hex bolt and washer through the bottom mounting holes and tighten
with a lock nut inside the cabinet. Continue steps 3-5 to complete installation.
Parts Needed:
Hex Bolt Lock Nut
(1/4")
(1/4" dia x 5/8")
6
Washer
(1/4" ID)