Product Features; Thermostat; Glass-Lined Tank; Thermal Insulation Layer - A.O. Smith EWH-10A2 Installation & Operation Manual

Electric wall hung water heater
Table of Contents

Advertisement

WATER HEATER
Figure 2
Warning:
Hot water in excess of 50℃ can produce scalding injury.Please be cautious when the
water is set exceeding 50℃, for the safety of your family and children in particular.

Glass-lined Tank:

This A.O.Smith patent technique,developed 60 years ago, evenly coats specialty silicon frit onto the tank inner
surface. The frit coating is then fused to the steel at 850℃,forming a durable impact-resistant lining. Further,
this glass-lined tank has passed the100Κ-times cycle test per UL(Underwriter ' Laboratories) standard.Water
heater life is greatly prolonged as a result of its antirust and anti-scale feature.

Thermal Insulation Layer:

maximally.
Anode Rod Protection:
This anode rod is of stainless-steel core and can protect water tank and greatly prolong the life of water heater.
Water heater should be located close to electric power outler, floor drain and point of use. Because water may be
discharged from safety vavle,a suitable drain must exist near the water heater. Be sure to have the inlet and outlet
of the heater facing downward.
4
EWH
EWH-10 Electric Wall Hung Water Heater
EWH-10 Electric Wall Hung Water Heater

Product Features

Thermostat:

fast and accurate.The outer knob is for setting water temperature
safely and conveniently.
This extra-thick insulation layer keeps temperature well and reduce heat loss

Installation Instruction

The surface thermostat senses water temperature

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ewh-10b2

Table of Contents