Table of Contents
Advertisement
1.3
PRODUCT IDENTIFICATION
2
INSTALL THE MAGICFX® STAGE BLOWER
Before installing the machine be sure that the specifications on the production label match the
local voltage and frequency.
2.1
GENERAL SAFETY RULES
•
Only authorised persons may carry out work with the MAGICFX® STAGE BLOWER.
•
Do not use the MAGICFX® STAGE BLOWER if there are people or animals in the direct output.
•
Make sure that children, unauthorised people and animals do not obtain access to the
MAGICFX® STAGE BLOWER.
•
Make sure there are no freestanding objects or objects that can be damaged by the
MAGICFX® STAGE BLOWER within the output distance.
•
Do not remove any safeguards, safety caps and safety symbols.
•
All required safety devices must be in good condition and function properly.
•
Ensure sufficient lighting of the surroundings.
•
Keep the workplace clean.
•
Always allow a free air space of at least 50cm around the unit for ventilation.
•
It is the installer's responsibility that the installation and safety instructions are in accordance
with current standards and regulations.
•
Every blower has to be grounded according to the current standard.
•
Do not use the fan as part of a construction.
•
Make sure that the machine is not exposed to extreme heat, moisture or dust.
•
CAUTION: In case of speed regulation, the fan may vibrate when incorrectly
mounted/installed. Check this before completing the installation.
•
CAUTION: The fan must always be built-in or mounted in a stable way before being taken
into operation.
6 MAGICFX® STAGE BLOWER – User and Installation Manual
Advertisement
Table of Contents
