Use; User/Installer Panel Functions - Baxi SILA RCV 300 Installation Instructions, Functioning And Maintenance

ENGLISH

Use

When switched on, during the first 2 minutes of operation, the appliance re-positions the bypass valve.
The engines then restart at the previously set speed.
Note: this system behaviour is normal and should not be considered a fault.
The product provides for continuous type operation.
The device is controlled by means of a special control panel. Its functions are described below. It is possible to pair use
with a Baxi pre-heater. This device shall be installed by an installer. The minimum distance of the pre-heater from the device
is 500 mm.

User/installer panel functions

12 12
5
6
The panel allows the appliance to operate in the user mode and in the installer mode (see below)
30
2
14
holida a y y holid
User
1
Holiday mode
2
Minimum speed
3
Medium speed
4
Maximum speed
5
Bypass LED
6
Alarm LED
3
min min med med max max
LED
Installer
Not used
- If on with 6 LED Vmin supply mode
- If on with 5 LED Vmin exhaust
Not used
- If on with 6 LED Vmax supply mode
- If on with 5 LED Vmax exhaust mode
see LED 2 and 4
see LED 2 and 4
4
A
B
C