Download Print this page

Frontpoint Doorbell Camera Manual

Hide thumbs Also See for Doorbell Camera:

GET STARTED

DOORBELL CAMERA

Table of Contents

Do you have a question about the Doorbell Camera and is the answer not in the manual?

Page 1 GET STARTED DOORBELL CAMERA...
Page 2 DOORBELL CAMERA GUIDE HOW TO ADD A DOORBELL CAMERA TO YOUR FRONTPOINT ACCOUNT...
Page 3 A power drill may be required depending on how your current doorbell is set up. Mobile App You must have the Frontpoint app in order to complete installation. COMPLETE THE FOLLOWING STEPS PRIOR TO INSTALLING THE CAMERA IN ITS FINAL LOCATION...
Page 4 No Chime If there is no chime in the system, you will only receive alerts on your phone and a resistor (10 Ohm 10 Watt) must be used in-line with the Doorbell Camera. FOR ADDITIONAL HELP, CALL CUSTOMER CARE AT 1-877-602-5276...
Page 5 INSTALLATION SYNCING TO THE FRONTPOINT APP The Doorbell Camera will flash blue when charging. Once the camera is Prior to installation, turn the circuit breaker off. fully charged, it will alternate between red and green. The camera is now ready to sync to your Frontpoint account! Carefully remove the existing doorbell button.
Page 6 The Doorbell Camera is booting Blue | Flashing Green | Flashing The Doorbell Camera is in Power Cycle. Hold the button until the LED The Doorbell Camera is entering troubleshooting mode rapidly flashes blue (about two minutes) Red & Green | Alternating Flashing...