Avaya LU15W70VH Quick Start Manual page 2

Using Anchors with Hollow Walls
Drill 5/16" diameter hole for each anchor and screw.
Fold and insert anchor in hole (see Figure 1).
Tap anchor until it is flush with the wall (see Figure 2).
Insert red key to pop anchor open behind wall (see Figure 3). DO NOT HAMMER KEY.
Remove key.
Place speaker flange (base) over anchors.
Insert screws and tighten until flush with the mounting surface. Do not over tighten.
Using Anchors with Solid Walls
Drill 5/16" diameter hole (minimum hole depth for solid walls is 1 1/2") for each anchor and screw.
Fold and insert anchor in hole (see Figure 1).
Tap anchor until it is flush with the wall (see Figure 2).
Place speaker flange (base) over anchors.
Insert screws and tighten until flush with the mounting surface. Do not over tighten.