Advertisement
Quick Links
PEC Code: 5330-235
COM Code: 408184075
Model: LUSQIN70VS
PEC Code: 5330-240
COM Code: 408184083
Model: LUSQOT70VS
Speaker Installation
The first step is to determine where the speaker(s) will be mounted. Ensure power is not connected to speaker wires prior
1
to installation.
Follow all local safety and building codes and route 70-volt speaker wires to desired ceiling location. Pull approximately
12" of wire through opening in ceiling.
Pull speaker wire through top (large) opening of speaker enclosure. Using the supplied mounting hardware, secure the
2
enclosure to the ceiling. Note that two toggle bolt/screws (for sheet rock ceilings) and two wood screws (for securing to
solid wood/beams) have been included. Utilize the two washers (supplied) as well (see diagram below).
Ceiling
Toggle bolts
(for sheet rock)
Indoor
Outdoor
70V Surface-Mount Speaker
Enclosure
Mounting Holes
Use two of the enclosure mounting holes as
a template (diagonally opposed), and mark
screw hole locations. If toggle bolts will be
used, use a drill to cut two, 1/2" diameter
holes in the ceiling.
Mounting Bolts
and Washers
Page 1 of 2
Issue 1, October 1999
54-2017-01 Printed in USA 9910
© 1999 Bogen Communications Inc. All rights reserved.
Specifications subject to change without notice.
Select Code: 701-000-120
Advertisement
Related Manuals for Avaya LUSQIN70VS
Summary of Contents for Avaya LUSQIN70VS
- Page 1 PEC Code: 5330-235 COM Code: 408184075 Indoor Model: LUSQIN70VS PEC Code: 5330-240 COM Code: 408184083 Outdoor Model: LUSQOT70VS 70V Surface-Mount Speaker Speaker Installation The first step is to determine where the speaker(s) will be mounted. Ensure power is not connected to speaker wires prior to installation.
- Page 2 The next step is to attach the speaker wires to the appropriate taps (wires) located on the back of the speaker. The speaker will also work perfectly well with these connections reversed. However, it is important to be consistent in the wiring of the speakers in the system.