Table of Contents
Advertisement
2.
PLAYBACK
1
Insert the cassette into the cassette slot.
2
Press the playback button
3
Picture scanning: Press the
(forward) button once or several times.
STOP h
4
Interrupt: Press the
5
Wind and rewind: Interrupt the playback function and
H
press the
(rewind) or
If, during wind/rewind, you want to have a quick access
to picture scanning, use the 'Instant View' function.
6
INSTANT VIEW: If you hold the
(Wind) button during wind or rewind, you will switch to
picture scanning. If you release the buttons, the video
recorder will automatically switch back to rewind or wind
again.
7
Eject a cassette: Interrupt the playback function and
hSTOP/JEJECT
press the
Notes: Some functions switch off automatically after a
while (e.g.: Pause, Still Picture, Scanning). This helps to
protect the cassette and prevent unnecessary power
consumption.
* The picture quality will deteriorate during Picture
Scanning. The sound is turned off.
* With this set you can play back cassettes that have
been recorded on other video recorders in the NTSC
standard. This only works for television sets which are
suitable for a picture frequency of 60 Hz.
During NTSC-play back some special features (e.g. still
picture) are not possible.
PLAY G
.
H
I
(reverse) or
button.
I
(wind) button.
0:20
H
I
(Rewind) or
button on the video recorder.
Still picture/Slow motion
STILL R
1
Press the
button. A still picture appears on
the screen.
STILL R
2
Each time you press
move on one step.
3
STILL R
Hold the
button. The picture will be played in
super-slow motion.
4
I
Press the
button several times. You have a choice
of several playback speeds. When you press the
button several times you will return to the still picture.
There is no sound during slow motion playback.
Note: If the still picture vibrates vertically, hold the
P r
P q
or the
button at step
minimal. This setting will be stored automatically.
Please note, however, that interference may still occur
with poor quality cassettes.
Tape position/Index search
Tape position: The elapsed playback time, given to the hour
and minute, appears in the display.
When you load a cassette, the video recorder must first
calculate the playing time. Therefore, '-:--' appears first and
only after the tape has been running for a few seconds the
playing time will be shown.
The playback time displayed can be incorrect when using
camcorder cassettes or with cassettes made for NTSC-VHS
equipment.
Index search: At the beginning of each recording, the video
recorder marks the tape with a code mark. You can search
for these code marks on the tape. Once the video recorder
finds the code mark or a blank space it will automatically
switch to playback.
INDEX E
1
Press the
button and then press the
button to select the next code mark or the
for the previous code mark.
Note: You cannot use the function 'Index search' with
recordings made on another video recorder that does
not have this code mark function.
again the picture will
H
1
until the vibration is
I
H
button
5
Hide quick links:
Advertisement
Table of Contents
