Special Features; Tuner Mode; Sound Track Selection; Externally Controlled Timer Recording - Philips VR675/05 Operating Instructions Manual

4.

SPECIAL FEATURES

Tuner mode

You can also use your video recorder as a TV receiver
(tuner).
1 STOP h
Hold the button, until
display.
2
Choose the required programme number with the
P q
or button or with the
3
Switch the video recorder to standby by pressing the
STANDBY m
button when you no longer want to watch
television.

Sound track selection

You can select the sound track. This is of particular interest
when the audio transmissions are multilingual.
1
SELECT
Press the button. The current setting will appear
in the display. By pressing the
times you can select from the four possibilities displayed
('STEREO' ,'RIGHT' ,'LEFT' ,'MONO' ).
Note: During playback you can select a fifth possibility:
the 'MIXED' mode. In this mode you can play back the
mono sound of the normal (linear) audio track together
with the sound of the stereo audio track. This can be
used for playing back a recording dubbed on another
video recorder.
* If there is no stereo sound recorded on the cassette,
the video recorder automatically switches over to mono
sound.
10
appears in the
P r
0-9
buttons.
SELECT
button several

Externally controlled TIMER recording

Do you have another device, e.g. a satellite receiver, which
can control other equipment by a Programming function?
This video recorder can be remote-controlled via socket
EXT.2
, by means of a scart cable.
1
Insert a cassette. Switch to standby with the
STANDBY m
button.
2
MONITOR
Hold the button until 'REC.P' appears in the
display.
3
If you want to interrupt this function before the recording
has actually started, hold the
video recorder switches to standby.
4
If you want to interrupt this function while a recording is
being made, press the

On Screen Display (OSD)

You can switch the On Screen Display (OSD) on or off.
1
AUTOINSTALL
Press the
2
Select and confirm 'OSD' .
3
Select and confirm 'ON' or 'OFF' .
OK
Note: With the button you can superimpose the
actual operating mode on the TV screen.

Channel number or frequency display

You can switch between the display for 'channel number' or
'frequency' for manual channel search.
1
Press the AUTOINSTALL
2
Select and confirm 'CHANNEL/FREQUENCY' .
3
Select and confirm 'CHANNEL' or 'FREQUENCY' .
MONITOR
button until the
STANDBY m
button.
button on the video recorder.
button.