Appendix A - Philips 32HFL5460D/27 User Manual

11.

Appendix A

Support for multiple remote
controls
Programming the Multi Remote
Controls function
Multi RC function supports up to four
TV sets operating in one room without
any interference from each other remote
controls. Each Guest Remote Control must
be programmed individually to one of the
four color (Blue, Yellow, Green and Red)
buttons on the remote control.
1. Press the button on the green
remote control (RC2573GR) to activate
the TV SETUP Menu.
2. Press ï to select
COMMUNICATION.
SETUP
LANGUAGE ENGLISH
COMMUNICATION
CHANNEL INSTALL
AUTO INSTALL TV
CABLE TUNING
USE CHANNEL TABLE
CURRENT RING RING1
DIGITAL SETUP
CONFIGURATION
Æ to enter the
3. Press
COMMUNICATION menu.
COMMUNICATION
COMMUNICATION MULTI RC
STORE
REMOTE CONTROL
4. Press Æ repeatedly until MULTI RC is
selected.
38
5. Press ï to select REMOTE
CONTROL.
COMMUNICATION
COMMUNICATION
STORE
REMOTE CONTROL
6. Press Æ repeatedly to toggle through the
four colors and select your preferred
color.
7. Press Î to select STORE and press Æ
to store your selection. Press
menu.
8. Using the Guest Remote Control,
press MENU and any color key
simultaneously to set the remote
control to the corresponding color that
>
you have selected in the REMOTE
>
CONTROL option. If BLUE is
>
NO
selected on the REMOTE CONTROL
NO
option, correspondingly, you must select
> BLUE on the Guest Remote Control.
>
You can now use the Guest Remote
Control to operate the TV set.
9. To check whether you have programmed
the MULTI RC function correctly, aim
the Guest Remote Control at the TV
and press OK for five seconds.
Information of the Remote Battery,
>
Remote Color and the TV Color are
BLUE
shown on the screen. If the Remote
Color and the TV Color do not match,
you need to re-programme and ensure
they match to enable the Guest Remote
Control to operate the TV.
MULTI RC
>
YELLOW
to exit