Advertisement
RainScapes
Watering System
Landscape & Garden Watering Kit
continued from other side
Step 7: Adjust the spray.
With just a couple of twists of your fingers, you can change the distance of the spray. So even
if you are all thumbs, it's easy to adjust the nozzles just the way you want them. To adjust the
distance of the spray, grip the top, larger, vertical grooves on the nozzle and rotate counter-
clockwise to increase the distance and clockwise to decrease. NOTE: If water leaks from just
below the nozzle, rotate the nozzle a couple of turns clockwise until the leaking stops.
HELPFUL HINTS: It's a "snap!"
The RainScapes System™ was designed to put water where you want it. That's why we've
included nozzle adapters that change the full-circle spray to a half-circle. Simply "snap" them onto
the very top of the nozzle and presto! You have a half circle! HINT: The nozzle adapter must be
removed in order to adjust the spray or to unscrew a nozzle. Simply "unsnap" it!
Want to go higher?
If you need to water taller plants, you can raise the spray with the enclosed risers. Unscrew the
nozzle from the cap, making sure to grip the lower, smaller, vertical grooves on the nozzle when
unscrewing, and screw the riser onto the cap. Then screw the nozzle onto the top of the riser. You
can even use more than one riser on each sprinkler for really tall plants. Just screw them together.
Having regrets about your piercings?
Need to move a sprinkler? No problem. We've included 8 "goof" plugs to patch your previous
spots, or any goofs that happen along the way. Pinch the sides of the tubing and hold firmly when
inserting a plug.
TIP: Need more than one system but only have one faucet? Eliminate the hassle of connecting
and disconnecting multiple RainScapes Watering Systems™ or a RainScapes Watering System™
and a hose by attaching a "Y" connector with shut-off valves (not included) to your faucet.
Care and Maintenance of your RainScapes Watering System™.
To ensure that your RainScapes Watering System™ lasts as long as you do, once a year, remove
nozzles and flush with water to remove debris. Before freezing weather, detach the tubing from
the faucet, remove the end cap, and allow the water to drain from the system. It is not necessary
to store this product indoors during colder months. The RainScapes Watering System™ was
designed to be run at a lower water pressure. If you have high water pressure, do not run this
system with the water completely on. If using a long garden hose to connect the RainScapes
Watering System™, you may experience a decrease in water pressure and water flow.
P h o n e O rd e r s: 1 - 8 0 0 - 4 2 7 -3 3 6 3
#38-215
™
E - M A I L : i n fo @ g a rd e n e r s . c o m W EB : w w w. g a rd e n e rs . c om
C us tom e r S e rv i c e : 1 - 8 0 0 - 8 7 6 - 5 5 2 0
50180
Step 6 & 7
Step 7 & Adding Risers
Risers
0329G
Rev 2/12
Advertisement
