Philips CE120/55 User Manual page 12

2
Check the car's wiring carefully and
connect them to the supplied standard
connector.
9 9
8 8
7 7
6 6
ENG
12
Connector
1 Black wire
2 Blue wire
3 Yellow wire
4 Orange/
White
1 1
5 Red wire
2 2
3 3
4 4
5 5
6 Green and
green/black
wires
7 White and
white/black
wires
8 Gray and
gray/black
wires
9 Purple and
purple/black
wires
Connect to
A metal surface of the car
First connect the black
ground (earth) lead, then
connect the yellow and red
power supply leads.
The electric antenna
control lead or power
supply lead of the antenna
booster
If there is no electric
antenna or antenna booster,
or it is manually operated
telescopic antenna, it is not
necessary to connect this
lead.
The +12V car battery
which is live at all times .
illumination switch .
The +12V power terminal
which is live in the
accessory (ACC) position
of the ignition switch
If there is no accessory
position, connect to the
+12V car battery terminal
that is always live. Be
sure to connect the black
ground (earth) lead to a
metal surface of the car
fi rst.
Left speaker (Rear)
Left speaker (Front)
Right speaker (Front)
Right speaker (Rear)