Operation - Gemini GTF46 Manual

OPERATION

The fan can be operated by the control panel located on the top of the Fan or by the remote
controller.
1. Place the Fan on a stable and flat surface. Plug the power cord into a.c. 220 - 240V
electrical outlet. The LED screen will display the current room temperature
2. POWER: Turn the Fan ON by pressing the POWER
speed .
3. SPEED: Adjust the Fan speed to the desired level: Low, Medium, or High by pressing
SPEED button. The speed setting is displayed on the LED screen .
4. MODE: Press the MODE
Z
Sleep mode.The mode is displayed on the LED screen.
Z
5. OSC: Press the OSC
stop the oscillation, press the button again. The maximum angle is 75°.
6. TIMER: Press the TIMER
12 hours intervals, from 1 hour to 12 hours.
7. Power save mode : when the 'Sleep' mode or the 'Timer' is on, the main LED Display will
be off automatically after 30 seconds, and you can press any button to turn on the LED
Display again.
button to set the Fan as Normal
button to allow the Fan to oscillate the wind direction. To
button to set desired auto power off time. There are
LED Display
3
Control Panel
℃
button, the fan will start at Low
, Natural
.
, or