1
2
•
1 – trigger signal IN/ OUT
•
2 – XLR / RCA output to
connect power amplifier or
preamplifier
•
3 digital input
•
4 – Power cord input
•
5 – ON/OFF general switch
*- trigger
signals use for interconnectig preamplifier and Power amplifier
(with terminated jack cable supplied) when desire turn/off and turn ON
power Amp and Preamp simultaneous with remote control when each
machine are in Stand-by.
**- XLR and RCA output . Is possible use each output
different amplifiers or preamp input Simultaneous if necessary
3
to send signal to two
5
4
2
9