Advertisement
Available languages
Available languages
problem
No power on
No sound
Distorted sound
The signal is low
Main fuse is blow
Remote control
do not work
Troubleshooting
Possible cause
The plug on the
power cord is not
connected or is not
fully inserted .
The mains fuse is
blown
Connecting signal
Input or output cables
incorrect
The source has an
output signal too high
and preamplifier input
is saturated
Increase output
volume or check cable
connections
Current overload
Batteries low or any
objects in front of
receiver
remedy
Securely connect the
plug or check the fuse
on the rear panel next
to the socket
Check the RCA or XLR
cables and / or the
correct connection
sequence of sources
Turn down the
volume of the source
if it is equipped with
such control
check the correct
position of source
cable
replace with identical
fuse. if the fuse blows
again contact service
center
replace batteries or
remove any obstacles
in front of the
infrared receiver
10
Advertisement
