Intended Use
The two tone air horn is a horn for motor vehicles with 12 V power supply.
This two tone air horn has been design-certification tested according to ECE-
Regulation 28. This Regulation specifies a minimum sound pressure of 93
dB(A) at a distance of 7 m in front of the vehicle.
Any use different than described above may result in damage to the product.
In addition it also can lead to threats such as short circuit, fire, electric shock,
etc.
Only use the included components of the air horn set. Do not install any other
components and do not use any other accessory.
Please follow carefully the safety instructions and the technical data.
Included
Two air horns in different sizes (1) + (2)
Compressor (3)
Relay (4)
Air Y – connector (5)
Air hose (6)
General Notes
Before carrying out the electrical connection of the two tone air horn check the
polarity of the factory-installed horn in your car.
When installing only use cables with sufficient cross section (at least 4 mm
and permitted isolation.
Please note the rules specified by the vehicle's manufacturer for additional
installation of electric parts.
Regularly check that all bolts and nuts are tightened so that they can not
loosen while driving.
Installation
9
2
)