BMW F01 Manual page 91

The DVD directory is read directly after loading. The contents of the DVD have to be read
before the next DVD can be inserted by pressing the Load button again followed by the
button for the DVD tray.
The quick-load function must be activated in order to load all DVDs one after the other.
The Load button must be pressed for approximately 2 seconds for this purpose. The
LEDs in the tray buttons for trays that are empty begin to flash.
Up to six DVDs can be inserted one after the other, depending on the number of empty
trays. The contents of the DVDs inserted are read either once the final empty tray is
occupied, after a timeout period or if the Load or Eject button is pressed.
The shutter must be open in order to insert the DVDs. The slot lighting flashes when it is
possible to insert a disk. Operation is described in detail in the Owner's Handbook for the
vehicle.
An individual DVD can be ejected by pressing the Eject button followed by the operating
button concerned. Pressing and holding the Eject button ejects all the DVDs immediately
one after the other.
Supported compressed audio formats:
• MPEG-1 Layer 3 Audio (MP3) with ID3 tag version 1 and version 2
• Windows Media Audio (WMA) up to version 9 with WMA tags
• Advanced Audio Coding (AAC)
Audio formats that are protected by Digital Rights Management (DRM) cannot be played.
The data on the DVDs is decoded by the DVD changer and converted into digital MOST
signals (audio) or analog CVBS picture signals (video).
If the vehicle is equipped with the HiFi speaker system, the digital data on the DVD is
sent to the head unit through the MOST. Here it is converted to analog data and
output through the HiFi amplifier and the speakers.
If the Top-HiFi system option is installed, the decoded audio data is sent directly to the
Top-HiFi amplifier through the MOST.
91
F01 Audio Systems