Configure As A Bridge - PairGain CRA-C User Manual

Configure as a Bridge

Configure Bridge parameters at the Bridge/Router Menu. Bridge configuration
options are maintained and restored through the system's local service port and
are kept in NVRAM to be used in subsequent initializations.
1 Type at the Bridge/Router Menu to display the Bridge
Configuration Menu.
2 Type , press the spacebar to toggle to Bridge, then press
ENTER
ENTER
. At the prompt,
Y to display this screen. Ensure the mode setting is Bridge.
07/02/97 PAIRGAIN TECHNOLOGIES
ATU-C ADSL MEGABIT MODEM TERMINAL
BRIDGE CONFIGURATION MENU
-------------------------------------------------------------
SETTINGS 1. BRIDGE/ROUTER MODE
2. LOCAL IP ADDR
3. LOCAL SUBNET MASK
4. BOOT ROUTER IP ADDR
5. DEFAULT ROUTER IP ADDR
6. SPANNING TREE
7. BOOT SERVER IP ADDR
8. BOOT MODE
9. IMAGE FILE NAME
A. IMAGE LOAD MODE
B. PACKET ENCAPSULATION
--------------------------------------------------------------
(C)onfirm (U)ndo (R)eturn (M)ain
ENTER CHOICE-->
3 Do the following for each Bridge Configuration option you want
to change:
_
Type the number or letter of the option you want
to configure.
_
Select, using the spacebar, or type in the appropriate
information for each option as indicated in Table 10
then press
Megabit Modem CRA-C User Manual
Save current setting (Y/N)
08:54:11
01.01
BRIDGE
192.168.240.10
255.255.255.0
0.0.0.0
192.168.240.1
DISABLE
0.0.0.0
LOCAL
LOCAL
HDLC
ENTER ENTER
.
Configure and View Status
, type
31