Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Jaycar Electronics QC3133
Summary of Contents for Jaycar Electronics QC3133
- Page 1 Front Cover Quick Installation Guide...
- Page 2 Quick Installation Guide...
-
Page 3: Table Of Contents
Quick Installation Guide Contents 1. INTRODUCTION ..................2 2. SAFETY INSTRUCTIONS ................2 3. INSTALLATION .................... 4 3.1 I ............4 NSTALLATION OF ULLET AMERAS 3.2 I ..........7 NSTALLATION OF AMERAS 3.3 I ......13 NSTALLATION OF ANDAL ROOF AMERAS 3.4 I ......... -
Page 4: Introduction
Quick Installation Guide 1. Introduction Thanks for purchasing our product. For any question or need, welcome contact us at any time. We will make every effort to ensure correctness of the information contained in this manual, which may be subject to change from time to time without prior notice. - Page 5 Quick Installation Guide 6) Avoid use of the equipment in any environment other than suggest in this manual. 7) Prevent water or any other liquid from flowing into the equipment. 8) For replacement of any part, contact the distributor in advance and make replacement with a new one , or similar components which have the same specification.
-
Page 6: Installation
Quick Installation Guide 3. Installation 3.1 Installation of Bullet Cameras a. Ceiling Mounting Expansion Bolt Locking Screw... - Page 7 Quick Installation Guide Insert three expansion bolts in place into the ceiling and fix the equipment with three locking screws. Completion of Installation b. Wall Mounting...
- Page 8 Quick Installation Guide Locking Screw Expansion Bolt Insert three expansion bolts in place into the wall and fix the equipment with three locking screws.
-
Page 9: Installation Of Mini Dome Cameras
Quick Installation Guide Completion of Installation 3.2 Installation of Mini Dome Cameras Ceiling Mounting Setup of Sticker... - Page 10 Quick Installation Guide Paste the sticker in place at the proper position as selected. Mini Dome Camera...
- Page 11 Quick Installation Guide Collar Remove the collar off the camera by rotating it down...
- Page 12 Quick Installation Guide Expansion Bolt Locking Screw Fix the pedestal by drilling locking holes around the sticker and inserting three expansion bolts into the holes and fastening it with three locking screws.
- Page 13 Quick Installation Guide...
- Page 14 Quick Installation Guide Adjust it to an appropriate angle.
-
Page 15: Installation Of Vandal-Proof Dome Cameras
Quick Installation Guide Mount the collar back by rotating it up Completion of Installation 3.3 Installation of Vandal-Proof Dome Cameras Ceiling Mounting... - Page 16 Quick Installation Guide Setup of Sticker Paste the sticker in place at the proper position as selected.
- Page 17 Quick Installation Guide Locking Screw Remove the front component by loosening the three locking screws with a screwdriver.
- Page 18 Quick Installation Guide...
- Page 19 Quick Installation Guide Expansion Bolt...
- Page 20 Quick Installation Guide Locking Screw Fix the pedestal by drilling locking holes around the sticker and inserting four expansion bolts into the holes and fastening it with four locking screws. Adjust it to an appropriate angle.
- Page 21 Quick Installation Guide Locking Screw Fix the front component on the pedestal by tightening the three locking screws.
- Page 22 Quick Installation Guide Completion of Installation...
-
Page 23: Installation Of Indoor Dome Cameras
Quick Installation Guide Installation of Indoor Dome Cameras Ceiling Mounting Setup of Sticker Paste the sticker in place at the proper position as selected. - Page 24 Quick Installation Guide Remove the shield off the camera by rotating the collar down Expansion Bolt...
- Page 25 Quick Installation Guide Locking Screw Fix the base by drilling locking holes around the sticker and inserting three expansion bolts into the holes and fastening it with three locking screws. Adjust it to an appropriate angle.
- Page 26 Quick Installation Guide After angle adjustment, mount the shield back by rotating the collar up.
- Page 27 Quick Installation Guide Completion of Installation...
-
Page 28: Connecting Cables
Quick Installation Guide 4.Connecting Cables Client Power Supply 10/100M Adaptable Cable Waterproof structure, which must be Steps installed and tightened! Thread cable Make crystal head BNC Output Reset Button ALMOUT DGND ALARM Audio Input Audio Output Connection for Multiple Functions... - Page 29 Quick Installation Guide Note: Some model support POE function, after connect RJ45 cable, no need to connect additional power supply . Standard models only have basic functions. full function models have all connectors. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS...
- Page 30 Quick Installation Guide 5.Login Menu System 1) Minimum system requirements: CPU: Intel Core Duo II dual-core processor or higher Memory: 1G or more Video memory: 256M or more Operating system: Windows 7/Windows 8/Windows 2008 (32/64- bit), Windows 2003/Windows XP/Windows 2000 (only 32-bit) Display: 1024 ×...
- Page 31 Quick Installation Guide Step 1: Run to Control Panel > Network Connection and Sharing > Local Connection in Windows 7 system, and set your PC in the same network segment where the camera is located, as shown below.
- Page 32 Quick Installation Guide...
- Page 33 Quick Installation Guide...
- Page 34 Quick Installation Guide...
- Page 35 Quick Installation Guide Note: When software IPC Device Search is used for search, which employs multicast protocol to search network information on the equipment across segments, and no multicast data packet is permitted by any firewall, so a firewall must be disabled to acquire network information on the equipment.
- Page 36 Quick Installation Guide Step 2: Run the IP search tool Device Search provided in the CD as attached. Search IP address for the equipment within the segment by clicking Search button. Any IP address acquired for the equipment and information on HTTP port will be displayed as below.
- Page 37 Quick Installation Guide An example of correct parameters is given below: IP address: 192.168.1.123; Gateway: 192.168.1.1; Subnet mast: 255.255.255.0 Account name: admin; Password: admin Step 3: For initial use of Internet Explorer (IE) for access to the network camera, a plugin has to be installed by the following means: Access IP address of the IP camera to automatically load the controls from it.
- Page 38 Quick Installation Guide...
- Page 39 Quick Installation Guide Step 6: Enter the user name and password (the default user name and password are both "admin"), and click "Login" to log in. Step 7: After successful login, The default preview page will be displayed.
- Page 40 Quick Installation Guide...
- Page 41 Quick Installation Guide...
Need help?
Do you have a question about the QC3133 and is the answer not in the manual?
Questions and answers