Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Jaycar Electronics QC8602
Summary of Contents for Jaycar Electronics QC8602
- Page 1 Integrated Intelligent Speed Dome User Manual V 1.0...
-
Page 2: Table Of Contents
Index CHAPTER 1 MAJOR FEATURES........................3 ‐ PTZ ......................3 UILD IN ‐ ..................3 UILD IN NTEGRATED AMERA .........................3 EATURES CHAPTER 2 INSTALLATION ........................5 ..................5 NSTALLATION PREPARATION ......................5 NSTALLATION ......................8 NITIAL SETTING ......................9 WITCH SETTING CHAPTER 3 OPERATION INSTRUCTION ....................12 ‐ ....................12 OWER ON CTION ....................12 ... -
Page 3: Safety Instruction
Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions”: Warnings: Serious injury or death may cause if any of the warnings is neglected. Cautions: Injury or equipment damage may cause if any of the cautions is neglected. - Page 4 damp locations, or fire or electrical shock will occur otherwise. 3. Do not aim the camera at extra bright places (e.g. the sun or the light). A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of CCD at the same time. 4.
-
Page 5: Chapter 1 Major Features
Chapter 1 Major Features Integrated speed dome adopts completely digital control, and its drive system is designed elaborately. There are functions like auto-day and night functionality, auto tracing white balance, back-light compensation besides presets, auto scan, patrol, park movement. It can realize o-overall real time surveillance. The speed dome supports PELCO－D, PELCO－P and HIK Code protocols, and can identify them automatically. - Page 6 The speed dome can be controlled with the 2 buttons and scroll of mouse can be used under HIKVISION protocols with devices and client software. Click on a certain area and the device will move to the scene with corresponding point as the center. When a rectangular area is selected by left-clicking, device will move to its center and enlarge it.
-
Page 7: Chapter 2 Installation
Chapter 2 Installation 2.1 Installation preparation Please check if all the items on the package list have been included with your camera before installation and make sure they are in good condition. [Notice]: The standard of the power adapter is AC24V/3A. 2.2 Installation 1. - Page 8 3. Set Speed Dome Address and Baud Rate. At the back of speed dome attached the dial-up switches description, shown in figure 2.3. At the profile there are SW1 and SW2, shown in figure 2.4, used for setting the address, baud rate, communication protocol. Please refer to section 2.4, “Switches Settings”, for details.
- Page 9 Figure 2.5 Install the cover 5. Install the camera. Install this unit by holding it with both hands, aim APRAGAZ sockets on the camera (shown in figure 2.8) to the APRAGAZ sockets on the dome chassis (shown in figure 2.7). Plug the camera into the cover with the guide arc along with the guide pillar on the chassis until you will hear a voice “ka”.
-
Page 10: Initial Setting
Figure 2.8 APRAGAZ sockets and guide arc on the camera 6. Install the transparent cover. Please aim the two gaps on the flange of transparent cover (shown in figure 2.9) at the hook lock on the cover (shown in figure 2.10). Finally, fasten the two fixing screws on the two sides. Figure2.9 The transparent lower dome casing Figure 2.10 Installation of lower dome casing 2.3 Initial setting... -
Page 11: Switch Setting
2.4 Switch setting Figure 2.11 Dial-up switches description 1: SW1 address dial-up switch 2: SW2 baud rate and parity switch The two dialing switches SW1 and SW2 on device base board are used to set device address, baud rate, communication protocol and other parameters (as shown in the Figure 2.11, in which switch ON stands for 1). In SW1 and SW2, 1 is the lowest position and 8 is the highest position. - Page 12 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF...
- Page 13 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 2.4.2 Baud rate setting Switch positions 1, 2 and 3 in SW2 are used to set device baud rate from 100 to 101, representing baud rates of 2400bps, 4800bps, 9600bps, 19200bps and 38400bps respectively.
-
Page 14: Chapter 3 Operation Instruction
Chapter 3 Operation Instruction Note: Analog speed dome does not support operations through menu; all the functions are invoked or configured by special presets. 3.1 Power-on Action After power is turned on, device will perform self-test action that begins with lens motion, then horizontal motion and finally vertical motion. -
Page 15: Preset Points Functions
operation will still be possible. However, after other operation of device, camera will resume auto focus. Iris operation: press OPEN and the iris will enlarge and image brightness will increase. Press CLOSE and the iris will gradually shrink that leads to brightness decrease. Under automatic iris mode, both OPEN and CLOSE buttons are still valid. - Page 16 No.1 patrol Manual focus No.1 Auto scan Open zoom display No.1 Pattern (customized) Close zoom display Night mode Day mode Start Pattern(customized) D/N auto switch Pattern remember start(customized) Indoor Pattern remember end(customized) Outdoor Auto Trace White Balance Auto White Balance Auto IRIS Manual IRIS Open proportional pan/tilt...
- Page 17 Set the patrol to stop for 60 Start auto scan path (low speed) seconds Figure 3.3 2. Using Manchester code protocols(turn the 4 of SW2 on), the preset and corresponding function are as below: Presets Operation Call the preset Set the preset 1 to 35 Call functions Set functions...
- Page 18 Figure 3.4 Explanation: Take using Pelco-P/D, HIKVISION protocols for example, integrated analog speed dome supports 3 patrols, each of which support 16 presets(patrol 1 supports preset 1 to present 16, patrol 2 supports preset 17 to present 32, patrol 3 supports preset 33 to present 48), the stay time and speed can be set. The dome also support 2 auto scan path with movement limitation, the speed is adjustable.
-
Page 19: Appendix A Lightning And Surging Protection
Appendix A Lightning and Surging Protection This product uses TVS plate lightning protection technology to avoid damage caused by pulse signal that is below 3000W, like instantaneous lighting, surging, etc. According to the actual situation outdoors, necessary protection measures must be taken to secure the electrical safety. Signal transmission line should be at least 50 meters from the High-tension apparatus or high-tension cable. -
Page 20: Appendix Brs485B Us Common Sense
Appendix B RS485Bus Common Sense 1. RS485 Bus Basic Features According to RS485 Industry Bus Standard, RS485 Industry Bus is semiduplex communication bus with 120ΩResistance, the maximum loading capability is 32 effective loads (including main control equipment and controlled plant) 2. - Page 21 speed dome chassis, as shown in figure three. When the speed dome leave the factory, 120Ω matched resistance is not connected as default; users can set the 8 bit of the sw2 on to connect the matched resistance, on the contrary, if users don’t want to connect the matched resistance, turn the 8 bit of the sw2off.
- Page 22 In this case, it is recommended that a RS485 distributor being added. This product can change star connection into a connection that accord with RS485 Industry Standard effectively, consequently, solve the problems, lift communication liability, shown in figure five. Figure 5 5.
-
Page 23: Appendix C Wire Diameter And Transmission Length For 24V Ac
Appendix C Wire Diameter and Transmission Length for 24V AC When the wire diameter is a fixed value and 24V AC voltage wastage rate is below 10%, the recommended maximum transmission length is as follows(For the AC power supply device, the biggest voltage wastage rate is 10%. -
Page 24: Appendix D Wire Gauge Comparison List Home And Abroad
Appendix D Wire Gauge Comparison List Home and Abroad...
Need help?
Do you have a question about the QC8602 and is the answer not in the manual?
Questions and answers