What To Do If; General Conformity Declaration - Becker Centronic VarioControl VC581 Assembly And Operating Instructions Manual

Assembly and Operating Instructions
Problem
Receiver is not respond-
ing

General conformity declaration

Becker-Antriebe GmbH hereby declares that the device VC581 Centronic
VarioControl complies with the basic requirements and other relevant regula-
tions of the EC Directive R&TTE 1999/5/EC.
For use in the following countries: EU, CH
Subject to technical changes without notice.
14

What to do if ...?

Cause
1. The VC581 is outside
the radio range of the
transmitter/receiver.
2. The VC581 has no
power supply.
Remedy
1. Choose a different
location to plug in the
VC581.
2. Check that the
socket outlet to
which the VC581 is
connected is live.