Operation; Playing A Cd - Philips AZ7374/00 Instructions For Use Manual

OPERATION

Inserting the CD
• Push gently on
the CD center
so that it fits
onto the hub.

Playing a CD

1 Open the lid by pushing the OPEN slide control to the side.
2 Insert an audio CD, printed side up.
3 Close the lid by pushing down on the right-hand side.
Display indication of: (example)
y y
17 = total number of tracks / 51:06 = total playing time
4 Press the 2; button to start CD play.
Display indication of: (example)
y y
4 = current track / 2:56 = elapsed time of current track
5 Adjust the sound using the controls VOLUME and DSP.
6 You can interrupt CD play by pressing the 2; button. Continue CD play by pressing
the 2; button again.
Display indication of: time of the current position (flashing).
y y
7 Press the STOP 9 button to stop CD play.
Display indication of: total number of tracks / the total playing time.
y y
• If you press the STOP 9 button again, you will switch off the set.
Note: If no button is pressed for 90 seconds, the set will switch off automatically.
12
Removing the CD
• Hold the CD
by its edge
and press the
hub gently.