Protective Flip Cover - IBM WorkPad Handbook

Power
button

Protective Flip Cover

The cover protects the WorkPad screen when it is not in use and helps
reduce glare while you use your WorkPad. You can open the cover so
that it is at an angle, open it fully or remove it altogether by pulling the
cover out of the holes on the sides of the WorkPad. To reattach the
cover, reinsert the pegs in the holes.
Chapter 1
Turns your WorkPad on or off and controls the
backlight feature. If your WorkPad is turned off,
pressing the power button turns the unit on, and
WorkPad returns you to the last screen you were
viewing.
If your WorkPad is turned on, pressing the power
button turns the unit off, helping to conserve battery
life. Holding the power button down for about two
seconds turns the backlight on or off.
Page 3