Troubleshooting - Philips AZ7884/05 User Manual

TROUBLESHOOTING

WARNING
Under no circumstances should you try to repair the set yourself as this
will invalidate the guarantee.
Problem
No power,
playback does
not start
nF dISC
indication
no dISC
indication
HoLd
indication and/or
no reaction to
controls
20
Possible cause
Batteries
Batteries inserted incorrectly
Batteries are empty
Contact pins are dirty
Mains adapter
Loose connection
In-car use
Cigarette lighter is not powered Switch on ignition or insert
when ignition is off
CD-RW (CD-R) is not recorded
properly
The CD is scratched badly
or dirty
CD is not or incorrectly inserted Insert a CD, label upwards
The laser lens is steamed up
HOLD is activated
Electrostatic discharge
Solution
Insert the batteries
correctly
Change the batteries
Clean them with a cloth
Connect the adapter
securely
batteries
Use FINALIZE on the
CD Recorder to complete
the recording
Replace or clean the CD
Wait until the lens has
cleared
Deactivate HOLD
Disconnect the set from
power supply or take out
the batteries for
a few seconds