Advertisement
DUAL STAGE
TRANSMISSION
JACK
INCLUDES
SAFETY
CHAINS
K12134
ED2/JULY 19
DUAL STAGE TRANSMISSION JACK
3
DUAL
STAGE
LIFT
WAY TILT
CRADLE
Caution: Do not allow persons to operate or assemble this jack until they have read this manual
and developed a thorough understanding on how the jack works
4 HD
SWIVEL
CASTORS
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for kincrome K12134
Summary of Contents for kincrome K12134
- Page 1 INCLUDES SAFETY STAGE LIFT WAY TILT SWIVEL CHAINS CRADLE CASTORS K12134 Caution: Do not allow persons to operate or assemble this jack until they have read this manual ED2/JULY 19 and developed a thorough understanding on how the jack works...
-
Page 2: Table Of Contents
11. Lowering Pedal 12. Stabiliser Arms 13. Stabiliser Mounting Bracket 14. Air Vent Screw SPECIFICATIONS Model No: ..............K12134 Working Load Limit: ..........1000kg Minimum Height (w/saddle): ........920mm Maximum Height (w/saddle): .......1905mm Lift Height: ..............985mm First Stage Ram Stroke: ........505mm Second Stage Ram Stroke: ........480mm... -
Page 3: Important Safety Instructions
DUAL STAGE TRANSMISSION JACK General Safety Warnings Save all warnings and instructions for future reference. WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in serious injury or death. IMPORTANT SAFETY INSTRUCTIONS The use of a vehicle jack has inherent dangers to avoid risk of personal injury or property damage make sure you are fully aware of the operating instructions for this product, the recommendations in the vehicle owners manual for jacking of your vehicle prior to lifting the transmission. -
Page 4: Unpacking And Assembling
DO NOT remove any labels from the jack. DO NOT use brake fluid to top up the hydraulic unit. Use Kincrome hydraulic oil only (K12400). Use a qualified person to lubricate and maintain the jack. Before storing the jack in a safe area, ensure that all parts are clean and free of grease and oil, especially the saddle. -
Page 5: Operation
DUAL STAGE TRANSMISSION JACK Purging Prior to use conduct a visual inspection checking for abnormal conditions, such as cracked welds, leaks, and damaged, loose, or missing parts. Following assembly and before first use leave the jack for one hour to allow the oil to settle before purging the system. Loosen the air vent screw (14) no more than 2 full turns. - Page 6 If the transmission lifter has been exposed to rain, snow, sand, or grit it must be cleaned before it is stored or used. Important: Use only K12400 Kincrome hydraulic jack oil. Avoid mixing different types of fluid and NEVER use brake fluid, turbine oil, transmission fluid, motor oil or glycerine.
-
Page 7: Troubleshooting
(2 years) commences on the date that the product is purchased. If this product has materials or workmanship defects (other than defects caused by abnormal or non warranted use) you can, at your cost, send the product to place of purchase, an authorised Kincrome service agent or one of Kincromes addresses for repair or replacement. - Page 8 DUAL STAGE TRANSMISSION JACK www.kincrome.com.au...
Need help?
Do you have a question about the K12134 and is the answer not in the manual?
Questions and answers