Tyrell Chenergy HH399 User Manual

Tyrell Chenergy HH399 User Manual

450 amp battery jumper

Advertisement

Item No. :
HH399
450 Amp Battery Jumper
User's Manual
CHARGE UNIT FOR 20 HOURS BEFORE FIRST USE.
We are constantly improving our products so specifications are subject to change
without notice. Visit our website for the latest product information.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HH399 and is the answer not in the manual?

Questions and answers

Kenneth Burris
March 31, 2025

Can you use a 12 V charging cord to charge a tile H399?

1 comments:
Mr. Anderson
March 31, 2025

Yes, a 12V charging cord can be used to charge a Tyrell Chenergy HH399.

This answer is automatically generated

Summary of Contents for Tyrell Chenergy HH399

  • Page 1 Item No. : HH399 450 Amp Battery Jumper User’s Manual CHARGE UNIT FOR 20 HOURS BEFORE FIRST USE. We are constantly improving our products so specifications are subject to change without notice. Visit our website for the latest product information.
  • Page 2: Table Of Contents

    CONTENTS Important Information ���������������������������������������������������������������������������������������������������������������� 6 General Warnings ���������������������������������������������������������������������������������������������������������������������� 6 Storage �������������������������������������������������������������������������������������������������������������������������������������� 6 Proper Disposal �������������������������������������������������������������������������������������������������������������������������� 6 Product Features ������������������������������������������������������������������������������������������������������������������������ 7 Specifications ����������������������������������������������������������������������������������������������������������������������������� 7 Front View ��������������������������������������������������������������������������������������������������������������������������������� 8 Rear View ���������������������������������������������������������������������������������������������������������������������������������� 9 Battery Status �������������������������������������������������������������������������������������������������������������������������� 10 Charging the Battery Jumper ���������������������������������������������������������������������������������������������������� 10 AC Charging ........................
  • Page 3: Important Information

    Thank you for purchasing the HH399 by Tyrell Chenergy Products . With normal care and proper treatment, it will provide years of reliable service. IMPORTANT INFORMATION • Please read and understand all warnings, cautions, and notes included in this manual before using the 450 Amp Battery Jumper™...
  • Page 4: Product Features

    User’s Manual—Read before using this equipment PRODUCT FEATURES • Powerful jump starter with heavy-duty cables and clamps. • LED indicator for checking battery status. • High- pressure air compressor for inflating tires and sports equipment with easy-read analog pressure gauge. •...
  • Page 5: Front View

    FRONT VIEW Worklight Switch compressor Switch Pressure guage Air hose compartment LED worklight Jumper Cable USB Power port Air hose 9. Battery status indicators...
  • Page 6: Rear View

    User’s Manual—Read before using this equipment REAR VIEW Battery status button 2. 12V DC socket Charging jack...
  • Page 7: Battery Status

    BATTERY STATUS The LED Battery Indicator provides the current state of charge on the internal battery. It is the user’s responsibility to periodically monitor the battery’s status and recharge every 3 months in addition to recharging after each use. 1. Disconnect any input or output power cords and turn off all switches. 2.
  • Page 8: Jump Starter

    User’s Manual—Read before using this equipment 2. Open the dust cover on the charging jack. 3. Plug the small end of the DC power cord into the Battery Jumper ’s charging jack. 4. Plug the large end of the DC power cord into an accessory (cigarette lighter) socket. 5.
  • Page 9: Air Compressor

    3. Turn off the vehicle ignition and accessories (e.g. radios, lights, air conditioners), and disconnect all devices such as GPS and mobile phones or tablets. 4. Turn off all Battery Jumper switches and disconnect all accessories. 5. Determine the polarity of the vehicle’s battery terminals. The positive (POS, P, +) battery terminal is usually larger in diameter than the negative (NEG, N, −) terminal.
  • Page 10: Dc Output Socket

    User’s Manual—Read before using this equipment • To inflate a vehicle tire: a. Remove the valve cap from the valve stem of the tire. b. Attach the chuck of the air hose to the tire’s valve stem. c. Push the chuck lever down to secure the chuck to the valve stem. •...
  • Page 11: Usb Power Port

    USB POWER PORT You may operate the USB port and DC sockets at the same time. 1. Connect a user-supplied USB cable to the USB power port on the Battery Jumper. Press the battery status button,USB power port will be working. 3.
  • Page 12 The manufacturer does not provide any warranty for any accessories used with this product that are not manufactured and approved by Tyrell Chenergy Inc, for use with product. Further, the manufacturer shall not be liable for any incidental, special, or consequential damage claims incurred by purchasers, users, others associated with this product, including, but not limited to, lost profits, anticipated sales, business opportunities, business interruption, and any other injury or damages.

Table of Contents

Save PDF