Connect And Charge; Use The Supplied Usb Cable; Battery Level Indication - Philips SA2845/02 User Manual

3.4 Connect and charge

When you connect the player to the PC, it automatically charges.

3.4.1 Use the supplied USB cable

1 Before you use the player for the first time, charge it for at least 5 hours.
> The battery 2
2 Connect the supplied USB cable to the mini USB port at the bottom of the player, the
other end to your PC.
> The player will start to charge as soon as it is connected to your PC.
Note The player is fully charged when the charging animation stops and
displayed. Your fully charged player will allow up to 20 hours

3.4.2 Battery level indication

The approximate power levels of your battery are indicated as follows:
Full
Note When the batteries are almost empty, the low battery screen
player saves all settings and unfinished recordings and switches off in less than 60 seconds.
2 Rechargeable batteries have a limited number of charge cycles. Battery life and number of
charge cycles vary by use and settings.
8
has a 100% charge after 4 hours and an 80% charge after 2 hours.
Two-thirds full Half full
2 of music playback.
Low
is
Empty
blinks. The