KitchenAid KDTE334GPS0 User Manual page 5

Dries dishes with heat and a fan. This option,
with the use of rinse aid, will provide the best
drying performance. Plastic items are less likely
to deform when loaded in the top rack. Turn the
ProDry™ option off for an air dry.
(on some models)
Dries dishes with heat. This option, with the
use of rinse aid, will provide the best drying
performance. Plastic items are less likely to
deform when loaded in the top rack. Turn the
Heat Dry option off for an air dry.
(on some models)
Sanitizes dishes and glassware in accordance
with NSF International NSF/ANSI Standard 184
for Residential Dishwashers. Certified residential
dishwashers are not intended for licensed food
establishments. Only sanitizing cycles have
been designed to meet the requirements of the
NSF/ANSI 184 performance standard for soil
removal and for sanitization efficacy. There is
no intention, either directly or indirectly, that all
cycles on a NSF/ANSI 184 certified dishwasher
meet the NSF/ANSI 184 performance standard
for soil removal and for sanitization efficacy.
The Sani Rinse indicator glows at the end of the
cycle if the Sani Rinse option was successfully
completed. If the indicator does not activate, it
is probably due to the cycle being interrupted.
The upper rack has flip-up spray nozzles that
reach into deeper items such as sports bottles,
baby bottles, or oddly shaped items. Flip the
nozzles up to use them and down to move them
(on some models)
out of the way.
Raises the main wash temperature to improve
cleaning for loads containing tough, baked-on
food.
Runs the dishwasher at a later time or during
off-peak electrical hours. Select a wash cycle
and options. Touch the Delay keypad. Touch
START/RESUME. Close the door firmly.
NOTE: Anytime the door is opened (such as, to
add a dish), the Start/Resume keypad must be
touched again to resume the delay countdown.
OPTIONS CAN BE WHAT IT DOES
SELECTED
WITH
Available
Uses the heating
with any
element, vents, and
cycle except
a fan to speed drying
Rinse Only
times. ProDry™ option
defaults to On when
any cycle is selected,
except for Express
Wash and Rinse Only.
Available Activates the heating
with any
element at the end of
cycle except
a wash cycle to speed
Rinse Only
drying times. Heat Dry
defaults to On when
any cycle is selected,
except for Express
Wash and Rinse Only.
ProWash™ Increases the main
wash temperature from
Tough
105°F (41°C) to 140°F
Normal
(60°C) and the final
rinse from 140°F (60°C)
to 155°F (68°C).
ProWash™
Bottle Wash nozzles
ensure interior wash
Express
and rinse coverage
Wash
inside taller items,
Tough
such as bottles.
Normal
ProWash™ Raises the main wash
temperate from 105°F
Tough
(41°C) to either 130°F
Normal
(55°C) or 140°F (60°C).
Available Delays the start
with any of a cycle to the
cycle specified time.
5
ADDED TIME ADDED
TO CYCLE WATER
(HR:MIN) GALLONS
(LITERS)
ProDry™: 0
0:10 to 0:50
Extended
ProDry™
(includes
ProDry™ time):
0:40 to 1:20
Heat Dry: 0
0:10 to 0:50
Extended
Heat Dry
(includes Heat
Dry time):
0:40 to 1:20
0:00 to 2:20 1.2 to 6.2
(4.8 to 23.3)
0:07 0
0:00 to 0:30 0 to 3.0
(0 to 11.2)
0