Related Manuals for POP UP X PRO
Summary of Contents for POP UP X PRO
- Page 1 INSTRU CTIO NS FOR L ADD E R S A ND STEPL ADDER S info@popupproducts.co.uk +44 (0)1244 833 933 popupproducts.co.uk...
- Page 2 INSTRU CTIO NS FOR L ADD E R S A ND STEPL ADDER S...
- Page 3 INSTRUCTIONS FOR LADDERS • As far as possible, ensure that the stepladder or ladder AND STEPLADDERS is free from contamination by substances such as wet paint, mud, snow and oil. THE SAFE USE OF A STEPLADDER OR LADDER • Prior to use, carry out a risk analysis should you be obliged/required to do so by local or national legislation Congratulations on your purchase of an Altrex and regulations.
- Page 4 POSITIONING AND/OR ERECTING EXTENDING LADDER, ROPE-OPERATED A STEPLADDER OR LADDER CONT. LADDER (OR COMBINATION LADDER AS AN EXTENDING LADDER) • Position a ladder in such a way that each of its four • When using a combination ladder as an extending points are adequately supported by a firm bearing ladder, ensure that your feet do not catch in any nylon surface, therefore never against a window, against...
- Page 5 USE OF THE STEPLADDER OR LADDER • Never load a stepladder or ladder in excess of 150 kg • Do not use a stepladder or ladder outdoors in (= a person climbing the stepladder or ladder including high winds (force 6) or other unfavourable weather any “baggage”).
- Page 6 USE OF THE STEPLADDER OR LADDER CONT. WARRANTY CLAIMS is recognisable by the horizontal steps. A double-sided This Altrex product has been designed, manufactured stepladder can be climbed from either side. and tested with the greatest care. Should this product be used in accordance with the instructions and its •...
- Page 7 • Check that fixings (usually rivets, screws or bolts) are WARRANTY CLAIMS CONT. not missing, loose, or corroded. b) Should the client ask for an investigation to be carried • Check that treads are not missing, loose, excessively out by an independent institute, the costs for this worn, corroded or damaged.
Need help?
Do you have a question about the X PRO and is the answer not in the manual?
Questions and answers