Quikcell MAGsmart METALLIC User Manual page 19

same time. When device A and device B are not
currently paired, the two link operation is as follows:
a) Pairing Device A: With headset in off mode,
press and hold MFB until indicator light flashes
red and blue alternately. Using device A, search
the Bluetooth device for "MAGsmart Metallic",
enter pairing code "0000" and confirm, after
pairing the headset with phone A, and the
headset will enter into standby mode.
b) Turn off the Bluetooth function on device A
or power off A. The headset will go back to no
19