Step 6: Connecting The Photoframe To A Computer - Philips SPF3071/G7 User Manual

Philips Digital PhotoFrame
• Do not remove the memory card/USB flash drive before the copy process is
completed.
•
If the files you wish to copy from the memory card/USB flash drive already
exists in the internal memory of the PhotoFrame, the files will be overwritten
when you select
Compatible memory card formats :
1
Memory card format
SD/SDHC
MultiMediaCard(MMC)
Memory Stick(MS)
Mcmory Stick PRO(MS PRO)
Memory Stick Duo(MS Duo)
USB flash drive
• Maximum capacity specification listed above are subject to change without
prior notice
Step 6: Connecting the PhotoFrame
to a computer
You can connect the PhotoFrame to a computer using a mini USB
cable (to be purchased separately) to easily manage the files in
the internal memory of the PhotoFrame.
1. Start the computer and turn on the PhotoFrame.
2. Connect the smaller end of the USB cable to the mini USB port
of the PhotoFrame.
3. Connect the other end of the USB cable to a USB port on the
computer, making sure the connectors are fully inserted.
4. Once connected, the PhotoFrame will enter PC transfer mode
automatically.
5. When the computer has detected the PhotoFrame, the
PhotoFrame will appear in "My Computer" as "removable disk".
6. Now you can freely transfer the files in the PhotoFrame as you
would on other disk drive.
Getting started
to proceed.
Maximum capacity
32GB
1GB
4GB
2GB
2GB
16GB
EN-13