Advertisement
3. With the boot completely off:
a. Remove the batter cover screw, disconnect and remove the battery
b. Remove the two rear case cover screws
c. Carefully separate the front and rear cases starting with the bottom of the unit. Note: the top of the unit
is secured with plastic tabs. Use care when sliding the top of the two cases apart
(3a)
(3b)
4. Remove and replace defective fuses
A
F250m
(MM100)
A
F400m
(MM200)
Digital Multimeter Fuse Replacement
(3b)
F10A
(MM100 & MM200)
(3c)
(4)
Advertisement
