Advertisement
9. Please scan the QR Code for relative update systems, or please search for "ALIGN A13"
in iOS/Android App store.
Start A13 interface, click bluetooth connection, confirm and complete transmitter binding
process. Enter to A13 Radio Control System/Model Select/Choose the multicopter. Here is
the default settings :
M03 - ALIGN M470 (Support 4-axis drone, such as M470/M480L)
M04 - ALIGN M690 (Support 6-axis drone, such as M690L)
請掃描 QR Code 連結亞拓網站下載相關軟體，或是在 iOS/Android App store 搜尋"ALIGN
A13"。
開啟 A13 介面，進行藍牙連線後，確認遙控器對頻完成。進入〔A13
遙控器系統設置〕/
選擇
模型類型
選擇多軸機。
/
預設模型 M03：ALIGN M470 (支援四軸飛行機。例：M470、M480L)；M04：ALIGN M690 (支
援六軸飛行機。例：M690L)
A13 GST Transmitter is adjusted in the factory, only required to confirm the bluetooth connection and binding
success. The default parameter is the best value for Multicopter , highly recommend not to adjust randomly by
users who are unfamiliar with flight system for fear of wrong settings of transmitter to cause abnormal flight and
damage the Multicopter or people get hurt.
A13 GST 遙控器在出廠前已調整完成，僅需確定對頻成功即可使用。預設的參數均專為多軸飛行機調整最佳化數
值，強烈建議不熟悉系統操作者切勿進行調整，避免遙控器參數設定錯誤，造成飛行機飛行異常，嚴重者導致機體
損壞或人員傷亡。
7
Advertisement
