Philips 8FF3CME/05 Quick Start Manual page 7

3
Enjoy
Set the display auto
on/off by lighting
D
ETip
If the [On - Set current] brightness level
is too close with the [Off - Set current]
brightness level, the display Auto on/off
function may not work.
You can use the default brightness of ambient
lighting condition and you can also set the
brightness of ambient lighting condition.
Step 1 In the main menu, select [Setup]
> [Options] > [Smart power]
> [Lighting], then press OK to
confi rm.
Step 2 Select [Settings] and press OK to
confi rm.
• To use the default setting, select
[Default] and press OK to confi rm.
Step 3 Select [On - Set current] and press
OK to confi rm.
The PhotoFrame wakes up when
the brightness of environment
reaches the [On - Set current]
brightness.
• To have the PhotoFrame sleep at the
set brightness of ambient lighting
condition, select [Off - Set current].