Technical Data; Technical Information; Environmental Protection - PROLUMIA 4106090 Series Operating Instruction

ATTENTION
Please read the following instructions carefully to ensure that mounting operation will be carried out correctly. These instructions
should be properly preserved for future reference.
CAUTION
1. PLEASE ENSURE THE ELECTRICITY IS SWITCHED OFF BEFORE INSTALLATION.
2. The installer should prepare necessary accessories and spare parts (not provided).
3. The LED Eco-Flood fixture must be earthed.
4. Damaged safety glass must be replaced immediately with tempered glass.

TECHNICAL DATA

Input Voltage: AC100-240V 50Hz/60Hz
Light source: LED SMD
Lifetime: L70 >30.000 hours
Protection rate: IP65
Working temperature: -25 °C ~ +50 °C
Power factor: >0.95

TECHNICAL INFORMATION

LED ECO-FLOOD
Art. no. Input power Color temperature
41060900 10W 3.000K
41060901 10W 4.200K
41060902 10W 6.500K
41060920 30W 3.000K
41060921 30W 4.200K
41060922 30W 6.500K
41060930 50W 3.000K
41060931 50W 4.200K
41060932 50W 6.500K
MOUNTING
(SEE PAGE 2)
1. Do not mount on a surface prone to vibrations.
2. Switch of the power. Remove the screw which is used for mounting the bracket to the fixture. Remove the bracket. (see fig. 1)
3. Please make sure there is enough space around the fixture. (see fig. 2)
4. Mark the hole position for fixing the bracket onto the wall. Drill at the marked positions. (see fig. 3)
5. Mount the bracket to the wall. (see fig. 4)
6. Mount the bracket to the fixture. Adjust the LED Eco-Flood to the desired position and tighten the screw of the bracket.
Connect the mains cable with the cable of the LED Eco-Flood through the waterproof junction box (accessory). (see fig. 5)
7. Switch on the power and adjust the angle of the fixture to meet the desired application. (see fig. 6)

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling advice.
4
LED ECO-FLOOD
Luminous flux Art. no.
1.100Lm 41060950
1.200Lm 41060951
1.200Lm 41060952
3.250Lm 41060970
3.600Lm 41060971
3.600Lm 41060972
5.400Lm
6.000Lm
6.000Lm
www.prolumia.eu
Input power Color temperature
100W 3.000K
100W 4.200K
100W 6.500K
200W 3.000K
200W 4.200K
200W 6.500K
Luminous flux
11.000Lm
12.000Lm
12.000Lm
21.600Lm
24.000Lm
24.000Lm