Advertisement
Installing
Remove the stand from the monitor.
⒜
4EA
Fix the anchors (a) into each hole on the
wall using a hammer.
Connect the cable before fixing the
monitor onto the wall mount.
Caution: Make sure to install the wall mount onto a wall that is sufficiently strong.
If you install the wall mount onto a wall made of gypsum board or wood, the product
may fall because the wall cannot support the product.
Mark the locations of the four (4) holes
of the wall mount on the wall.
Drill the marked locations to a depth
of 35 mm using a drill with a diameter
of 6.0mm.
⒝
4EA
Fit the holes of the wall mount to those
of the anchors and insert the screws
(b) into the fitted holes.
A
Fix part A of the wall mount to the
groove of the stand at the bottom of
the monitor.
English
Advertisement
