Haier HWD100-BD1499U1 User Manual page 37

EN
Cause
Tip
code
E1 Drainage error
Unlocking error
E2
Water temperature sensor
F3
error
E4 Water Inlet error
F4 Heating system error.
F7 Motor system error
Water level in drum too
E8
high
Drying temperature sen-
F9
sor error
Water level in drum too
E12
high when drying
FA Water level sensor error
FC0 Communication bus error
FC1 Communication bus error
FC2 Communication bus error
FC3 Communication bus error
The distribution of laundry
Unb is unbalanced during spin-
ning
Fd Dry heating tube error
FE Drying motor error
10- Troubleshooting
Solution
Please check whether the drain valve and drain pipe are
blocked, or the drain pipe is bent. Check and clean the drain
sales service center.
sales service center.
Please check whether the tap is turned on, whether water
sales service center.
sales service center.
times, and contact the aftersales service center.
Please cut o water and power supply, and contact the after-
sales service center.
Please cut o water and power supply if this happens several
times, and contact the aftersales service center.
sales service center.
sales service center.
sales service center.
sales service center.
sales service center.
Please ensure the washing machine is leveled and take out
the laundry to make it loose, then put it back for spinning.
sales service center.
sales service center.
37