Advertisement
Function 13) Delete all
Reset/ delete all data to default:
Press the master button 13 times (13 double beeps) and within a
period of three seconds press a user button. This will delete all
data and reset the controller to default settings. The controller
will confirm this with a long beep, followed by a double beep.
Default settings:
A three-second pulse, five-second open time, four-second pre-
alarm time, door switch and push button have NO contact; output
is set for fail secure el. strike. The controller is in standalone
mode.
ORDERING CODES
LOKUS [box]-[card]
Box: A
Card: 4 – reading frequency 433 MHz (RF Transmitters)
Code
Specification
LOKUS A-4
Standalone RF controller/ receiver in A box,
Frequency 433MHz
REMO E-V9
RF transmitter in E box, 433MHz (remote
controller)
OTHER
Warranty only applies when Lokus controller is powered with
power supply form the Spider family.
Please read through our warranty and disclaimer statements.
Connection scheme and additional support for the use of this
product can be found on:
http://www.jantar.si/forum/en
CONTACT:
Jantar d.o.o.
Kranjska cesta 24
4202 Naklo
web:
SLOVENIA
mail:
Black line
LOKUS A-4 – Standalone RF controller/ receiver
www.codeks.eu
sales@jantar.si
5/2014
www.codeks.eu
Advertisement
