Table of Contents
Advertisement
DISPLAY
TV Aspect
Select which screen aspect to use based on the
shape of your TV screen.
[4:3]
Select when a standard 4:3 TV is connected.
[16:9]
Select when a 16:9 wide TV is connected.
Display Mode
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
[Letterbox]
This displays a wide screen picture with black
bands at the top and bottom of the screen.
[Panscan]
This fi lls the entire 4:3 screen, cropping the
picture as necessary.
Progressive Scan
(For Component Video connections)
Selects whether the COMPONENT
VIDEO(PROGRESSIVE SCAN) OUT jacks output
progressive signal. If your TV accepts progressive
format signals, you will enjoy accurate color
reproduction and high quality image by selecting
[On]. If your TV does not accept progressive format
signals, select [Off ].
If you set Progressive Scan to [On] in error, you
must reset the unit. First, remove the disc from the
unit. Next, press and hold STOP (Z) for about fi ve
seconds. The video output will be restored to the
standard setting, and a picture will be visible on
your TV.
MDT356-A5U-ARUSLL-ENG.indd 19
MDT356-A5U-ARUSLL-ENG.indd 19
AUDIO
2.1 Speaker Setup
Make the following settings for the built-in 2.1
channel surrounds decoder.
1. Press SETUP.
2. Use W/S to select AUDIO menu and then
press D.
3. Use W/S to select [2.1 Speaker setup] menu
and then press ENTER (b).
4. Press ENTER (b)
The [2.1 Speaker setup] appears.
5. Use A/D to select the desired speaker.
6. Adjust options using W/S/A/D buttons.
7. Press ENTER (b) to confi rm your selection.
Return to the previous menu.
Speaker selection
Select a speaker that you want to adjust.
Volume – Press A/D to adjust the output level of
the selected speaker.
Test – Press A/D to test the signals of each
speaker. Adjust the volume to match the volume of
test signals memorized in the system.
Connecting
19
2
11. 04. 05
11. 04. 05
6:00
6:00
Advertisement
Table of Contents
