Connecting To The Power Supply; Repeater Application; Adjusting The Video And Audio - Black Box AC3010A Manual

3.6 Connecting to the Power Supply

Connect the Transmitter and Receiver to the power supply with the 5-VDC, 1-A
power adapters provided.
Once connected, the system is ready to transmit the video and audio signals.

3.7 Repeater Application

Add up to eight HD View—HDMI Repeater units (AC3011A) to add more screens.
You can have a mixture of HDMI and DVI screens. Each unit can be up to 96 feet
(30 m) away from the previous unit.
NOTE: When cascading eight levels, use CAT6 UTP cable. The total distance should
be 640 feet (200 m).
Player
Transmitter
(AC3010A)

3.8 Adjusting the Video and Audio

A longer cable between the Transmitter and the Receiver will require more
adjustment for audio and video signals.
To adjust the HDMI picture quality, use the Receiver's Equalization (EQ) selector.
See Figure 2-3. In general, the longer the cable, the higher the number that has to
be set. Adjust the EQ selector one step at a time, up to position "7." After each
adjustment, wait to see the results of the adjustment at the screen.
HDMI to
DVI cable
HD-HDMI
Repeater
(AC3011A)
CAT6 cable
(up to 96 ft.
[30 m])
Figure 3-6. Mixed repeater application.
724-746-5500 | blackbox.com
Chapter 3: Configuration and Installation
DVI
HDMI cable
HD-HDMI
Repeater
(AC3011A)
CAT6 cable
(up to 96 ft.
[30 m])
HDMI
HDMI cable
Receiver
(AC3010A)
CAT6 cable
(up to 96 ft.
[30 m])
HDMI
Page 21