Table of Contents
Advertisement
Quick Links
Original operating instructions
Bench-type circular saw
Model:
M1H-ZP2-1-250
2015
Danger! Read all safety regulations and instructions.
Keep all safety regulations and instructions in a safe place for future use.
Manufacture: Zhejiang Huafeng Electric Tools Co., Ltd.
Address: Xiaoshun Town, Jinhua, Zhejiang 321035, P.R.China
Advertisement
Table of Contents
Related Manuals for Huafeng M1H-ZP2-1-250
Summary of Contents for Huafeng M1H-ZP2-1-250
- Page 1 Bench-type circular saw Model: M1H-ZP2-1-250 2015 Danger! Read all safety regulations and instructions. Keep all safety regulations and instructions in a safe place for future use. Manufacture: Zhejiang Huafeng Electric Tools Co., Ltd. Address: Xiaoshun Town, Jinhua, Zhejiang 321035, P.R.China...
-
Page 8: Table Of Contents
Table of contents 1. Safety regulations ..............................9 2. Layout and items supplied.............................12 3. Proper use ................................13 4. Technical data .................................14 5. Before starting the equipment..........................15 6. Assembly..................................15 7. Using the saw................................16 8. Operation .................................17 9. Replacing the power cable............................18 10. Cleaning, maintenance and ordering of spare parts ..................18 11. - Page 9 Caution! Wear ear-muffs. The impact of noise can cause damage to hearing. Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials. Never use the device to work on any materials containing asbestos! Caution! Wear a breathing mask.
-
Page 10: Safety Regulations
Danger! equipment or cable, keep them away from When using the equipment, a few safety your work area. precautions must be observed to avoid injuries 5. Securely store unused electric tools –Unused electric tools should be stored in a and damage. Please read the complete operating instructions and safety regulations dry, elevated or closed location out of the with due care. - Page 11 the working plate and stop in order to prevent Remain sensible when working. Do not use bouncing and twisting of the workpiece. the electric tool when you are distracted. 12. Avoid abnormal posture 19. Check the electric tool for potential –Make sure that you have secure footing damage –Protective devices and other parts must be...
- Page 12 deformed saw blades. tool attachments regularly –Replace a worn table insert. necessary, initiate repairs in order to reduce –Only use saw blades recommended by the noise. –Report faults on the electric tool, protective manufacturer which conform to EN 847-1. Warning! Keep attention When changing the devices or the tool attachment to the person saw blade.The cutting width is not smaller responsible for safety as soon as they are...
-
Page 13: Layout And Items Supplied
secured on a workbench or a table if at all 7 Make sure that fixed reducer rings for possible. securing the insertion tool have the same –Support long workpieces (e.g. with a roller diameter and have at least 1/3 of the cutting table) to prevent them sagging at the end of a diameter. -
Page 14: Proper Use
21 Groove danger of swallowing or suff ocating! 22 Scale • Saw blade guard 23 Stop rail • Push stick 24 Holder • Parallel stop 25 Slot • Rubber foot (4x) 26 Screw • Cross stop 27 Slot • Stop rail 28 Guide rail •... -
Page 15: Technical Data
found in this manual. Table width extension, left/right ....642 x 225 mm To use the equipment properly you must also Cutting height max...... 85 mm / 90° observe the safety information, the assembly ..........65 mm / 45° instructions and the operating instructions to be Height adjustment .... -
Page 16: Before Starting The Equipment
• All covers and safety devices have to be a minimum. • Only use appliances which are in perfect pro-perly fitted before the machine is switched wor-king order. • Service and clean the appliance regularly. • It must be possible for the saw blade to run •... -
Page 17: Using The Saw
• Mount and fasten the new saw blade in reverse order. Warning! reverse order. • Important! Note the running direction. The The guard hood must always be lowered over the workpiece before you begin to cut. cutting angle of the teeth must point in run-ning direction, i.e. -
Page 18: Operation
• Slide the cross stop 7.3.1. Stop height (Fig. 9-13) (14) into the groove (21) • The parallel stop supplied with the bench- of the table. • Slacken the knurled screw (20). type circular saw has two different guide faces. •... -
Page 19: Replacing The Power Cable
• A suction adapter set for connecting a worn. va-cuum extraction system to the blade guard and to the suction adapter is available as an 8.1.4. Making bevel cuts (Fig. 14/22) accessory. Bevel cuts must always be used using the parallel stop (7). -
Page 20: Disposal And Recycling
star-ting any cleaning work. 11. Disposal and recycling 10.1 Cleaning • Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a clean cloth equipment supplied or blow it with compressed air at low pressure. •...
Need help?
Do you have a question about the M1H-ZP2-1-250 and is the answer not in the manual?
Questions and answers