Table of Contents
Advertisement
1. This product is intended to be used only as specifically outlined in these Directions for Use. Any use
of this product inconsistent with the Directions for Use is at the discretion and is the sole
responsibility of the practitioner.
2. Keep solvents, flammable liquids, and sources of intense heat away from the unit as they may
damage the plastic housing of the charger, the seals, or the cover on the operating buttons.
3. To protect the light guide, after each curing procedure is completed, the handpiece should always be
placed back into its holder.
4. To obtain a safety operation, we suggest that check your local AC power supply voltage before you
buy and use this product from oversea.
5. Check unit for adequate light output before each procedure. Failure to verify output may allow
inadequate curing
6. In order to avoid electric shock do not introduce any objects into the unit with the exception of
replacement parts handled in accordance with the Operating Instructions. Do not attempt to change
the Curing LED, open or alter the unit in any way
7. Use only genuine Vector R & D parts when replacing defective components as directed in these
Operating Instructions. The product's warranty does not cover any damage resulting from the use of
third-party replacement parts.
2. Glossary of Symbols
Attention, Consult accompanying Documents
Alternating Current
Type BF Applied Part; Type BF Equipment - Protection against electric shock
Equipment class: Class II (IEC601-1) - double insulated
93/42/EEC Compliant
Icon to identify electric and electronic devices. The unit must be collected and
disposed of separately.
4
S-19-01-1125-UV101 V1.3
Advertisement
Table of Contents
